Follow Us
Investing in a palm kernel oil press machine is more than simply purchasing equipment—it is a long-term investment in production efficiency, operating costs, and business profitability.
When comparing palm kernel oil press machines, many buyers focus only on capacity or price. In this guide, Henan Glory outlines the key factors that palm kernel oil producers should evaluate before selecting a palm kernel oil press, helping you avoid common pitfalls when purchasing equipment.
Featuring large size, hard texture and low moisture content, palm kernels incur remarkably higher pressure and friction in the pressing procedure than common oilseeds including soybeans, peanuts and sunflower seeds.
Because of these characteristics, an ordinary oil press designed for common oilseeds may experience:
- Rapid wear of the screw and press cage
- Frequent material blockage
- Lower oil extraction efficiency
- Higher maintenance costs
- Shorter equipment lifespan
For this reason, Henan Glory has designed dedicated palm kernel oil expeller machines, rather than simply increasing motor power and pressing pressure.
Henan Glory palm kernel oil press machine
The durability of a palm kernel oil press largely depends on its wearing parts, including the press screw, press rings, press bars, and other high-friction components.
Many low-cost machines use ordinary carbon steel, which wears quickly when processing hard palm kernels. As wear increases, the pressing chamber loses precision, leading to lower oil yield, unstable production, and more frequent replacement of parts.
Henan Glory uses forged No.45 steel for major wearing parts. After forging and heat treatment, these components offer:
- Higher wear resistance
- Better impact resistance
- Greater dimensional stability under high pressure
- Longer service life than ordinary carbon steel
With years of use, operators can simply swap out heavily worn components rather than purchasing a new palm kernel oil press machine, greatly saving expenses.
Some suppliers claim their palm kernel oil presses support five-stage or six-stage pressing, which is actually false promotion. The maximum pressing stage stipulated by national standards is only four.
Given that palm kernel is a hard oilseed, Henan Glory’s palm kernel oil press machine features a two-stage pressing design, which strikes an optimal balance between high oil extraction efficiency and smooth material flow.
If the material remains inside the pressing chamber for too long, excessive compression can cause:
- Material burning
- Barrel blockage
- Increased equipment wear
- Reduced production stability
Under normal operating conditions, our palm kernel oil expeller can achieve a residual oil content of approximately 6–7% after a single pressing cycle, helping processors improve production efficiency without unnecessary re-pressing.
Palm kernel oil press machine
Many buyers compare machines based only on motor power. However, the screw speed has an equally important influence on production performance.
Henan Glory’s palm kernel oil press machine operates at a pulley speed of approximately 44 rpm, allowing material to move smoothly through the pressing chamber.
This optimized speed helps:
- Prevent material blockage
- Reduce overheating inside the barrel
- Improve production stability
After repeated trial operations, Henan Glory has confirmed that the optimal moisture content of palm kernels before pressing ranges from 8% to 10%.
If palm kernels are overly dry, the following problems may occur:
- Smoke generation during pressing
- Material blockage
- Excessive wear of the screw and chamber
If the moisture is too high, oil yield may decrease and cake quality may become unstable. Proper moisture management is essential for maximizing both oil yield and machine longevity.
A reliable drive system is another important consideration when selecting a palm kernel oil press machine.
Henan Glory’s palm kernel oil expellers are fitted with 4-pole motors, which deliver sufficient torque and ensure stable operation for continuous production.
Some manufacturers promote 6-pole motors, yet such motors are not practical for areas with unstable voltage. Others equip machines with undersized motors that fail to drive the equipment properly and wear out easily.
Palm kernel oill press machine
| Key Factor | Low-Quality Machine | Henan Glory Solution |
| Wearing Parts | Ordinary carbon steel, fast wear | Forged No.45 steel, longer service life |
| Pressing Structure | Unverified multi-stage claims | Two-stage design, optimized for hard kernels |
| Moisture Requirements | Unclear or untested | 8–10% optimal range, verified by trials |
| Motor Configuration | Undersized or impractical designs | 4-pole motor, stable for varying voltage conditions |
| Maintenance | Frequent part replacement | Simple one-person operation |
By evaluating key factors including wearing part materials, pressing structure, screw speed, motor configuration and maintenance needs of palm kernel oil expeller machines, processors can make well-informed purchasing decisions and achieve better long-term economic benefits.
Q: How do I maintain a palm kernel oil press machine?
A: Proper maintenance of your palm kernel oil press machine includes:
- Daily cleaning of the pressing chamber and residue removal
- Regular lubrication of bearings and transmission parts
- Checking screw and bar wear every 3–6 months
- Ensuring proper moisture content of raw materials to reduce unnecessary wear
- Using genuine replacement parts from the manufacturer
Henan Glory provides comprehensive maintenance guides and technical support to all customers, ensuring optimal machine performance throughout its service life.
Q: Do you provide installation and training for palm kernel oil press machines?
A: Yes, Henan Glory provides comprehensive after-sales support, including:
- Technical documentation and operation manuals
- Remote troubleshooting and ongoing technical assistance
- 12-month warranty on major components
Palm kernel oil press machine
Ready to invest in a durable, high-yield palm kernel oil press machine? Henan Glory is here to help.
What we offer:
(1) Palm kernel oil press machine
(2) Complete palm kernel oil processing lines
(3) Customized solutions based on your capacity and budget
(4) On-site installation, training, and after-sales support
(5) Genuine spare parts and technical assistance
Contact Henan Glory today to discuss your project and receive a customized palm kernel oil processing solution tailored to your needs.
Please answer the questions bellow before leaving the message. Our sales manager will contact you within 24 hours. And your contact information will be protected!